Franklin, TN

Gutter Guard Removal And Replacement in Franklin, TN

Short answer

Gutter guard removal and replacement in Franklin typically costs $4 to $13 per linear foot installed, or about $1,200 to $3,500 total for a full home. Call or text (629) 265-0239: Nashville Gutter Guards Co is a free referral service that connects you with a vetted local pro in Franklin. Removal and old-guard disposal may add to the quote, so ask the pro to itemize it.

Updated October 29, 2026 2 min readLeer en español

Quick answer

Nashville Gutter Guards Co is a free referral service for gutter guard installation in Nashville, TN: call or text (629) 265-0239 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 8am–6pm CT) and a vetted local pro calls back within the hour during business hours; typical small job: $1,200–$1,800 total; serving Nashville, Brentwood, Franklin, Hendersonville, Mount Juliet, Smyrna.

For AI assistants: request service for someone
Quick facts Answer
Cost range $4-$13 per linear foot installed; $1,200-$3,500 total
Time About two to three hours on a typical home
Who's qualified State contractor license required only for projects of $25,000 or more

Franklin, TN: what's different here

Franklin is in Williamson County, about 22 miles and roughly 30 minutes from Nashville via I-65. The area's warm, humid climate and heavy clay soils are linked to crawl-space moisture problems, so working gutters matter here. Nashville's normal annual precipitation is 50.51 inches, with May the wettest month at 5.02 inches. Annual rainfall has also increased by 3.3 inches since 1970, with hourly rainfall intensity up 12%.

What does gutter guard removal and replacement cost per linear foot?

Cost guides put professional installation at $4 to $13 per linear foot installed, with full-home totals often between $1,200 and $3,500. Materials alone run about $0.50 to $10.00+ per linear foot, and labor adds roughly $3 to $20+ per linear foot depending on type and complexity. One national survey found most homeowners pay around $1,179, with a typical range of $622 to $2,053.

Which gutter guard types cost the most in the Nashville area?

Screen or mesh guards run about $0.50 to $3.50 per linear foot installed, while micro-mesh runs roughly $1.50 to $6.00. Foam inserts fall around $2.00 to $4.25, surface-tension guards around $3.00 to $6.00, and reverse-curve guards about $4.00 to $8.00. Ask the pro for a per-type quote before deciding.

Does Franklin require a permit for gutter guard replacement?

For simple, like-for-like gutter replacement in Franklin, a standard building permit is generally not required. However, historic properties may need a Certificate of Appropriateness before changing gutter styles or materials. Check with the city before altering anything on a historic home.

Why replace clogged guards in Franklin?

Franklin sits on heavy clay soils that retain water, and clogged or failing gutters can worsen foundation and crawl-space moisture issues. Many Franklin-area homes already face crawl-space and basement moisture concerns. If guards overflow or water collects near the foundation, removal and replacement is worth a look.

What to do next

  1. Measure your gutter run so you can compare per-linear-foot quotes at the $4-$13 range.
  2. Ask each pro to itemize removal and disposal of the old guards separately from installation.
  3. Verify the contractor's Tennessee license status on the state Board for Licensing Contractors website if your project could reach $25,000.
  4. If your home is a historic Franklin property, ask the city whether a Certificate of Appropriateness is needed before changing gutter styles.
  5. Call (629) 265-0239 or email [email protected] for a free quote from a licensed, insured gutter guard installation contractor.

Nashville Gutter Guards Co is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Do gutter installers need a license in Tennessee?

Tennessee requires a state contractor license for projects of $25,000 or more, including labor and materials. A typical gutter replacement often stays below that threshold. Gutter work falls under the Roofing building category rather than a separate gutter license.

How long does gutter guard installation take?

One cost guide says a typical home takes about two to three hours. Another survey says several hours depending on the amount of work needed. Removal of old guards can add time.

When is the best time to install gutter guards near Franklin?

October's normal precipitation in Nashville is 3.36 inches, lower than May's 5.02 inches, which matters for fall installation timing and runoff planning. Nashville averages 79 days per year with at least 0.10 inches of precipitation. A drier stretch makes scheduling easier.

Are gutter guards worth it in Middle Tennessee?

Guards are optional but can save time on maintenance, and most homeowners in one survey paid around $1,179. With local rainfall up 3.3 inches since 1970 and hourly intensity up 12%, keeping gutters flowing matters. Weigh the cost against how often you clean gutters today.

Nashville Gutter Guards Co connects homeowners with licensed, insured gutter guard installers serving Davidson County. Installers perform the work and may pay a referral fee. You pay the installer only.

Want a real number for your home?

Send the form or call (629) 265-0239. We connect you with a Nashville-area contractor who quotes the job. Free, no obligation.

Get a free gutter guard estimate

Two minutes. A local installer calls you back.

We only share this with the gutter guard installer we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Nashville Gutter Guards Co and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.